The Strategic Trade Atlas is developed to promote understanding of global trade flows of strategic goods, i.e., goods of militarily strategic value, including dual-use goods. Trade flows are classified under a basket of Harmonized System (HS) codes associated with strategic commo...
EURDEP (EUropean Radiological Data Exchange Platform) is both a standard format for radiological data and a network for the exchange of automatic monitoring data. The latest release of the format is version 2.x, which is in use since the beginning of 2002. The data-format is appl...
Gamma spectra of uranium and plutonium samples were recorded by various gamma spectrometers. The spectra are intended to be used for the development of data evaluation programmes. For medium-resolution spectrometers (LaBr3 and CdZnTe) see: https://publications.jrc.ec.europa...
The Export Control Handbook for Chemicals contains a large list of chemicals subject to export controls (restrictions, or prohibitions under sanctions) because of their inclusion in various EU regulations or the Chemical Weapons Convention treaty. Each chemical is correlated with...
Small punch test data for Zircaloy 4 and 15 15 Ti on tube specimens cut from nuclear fuel cladding tubes. The data was acquired in the framework of the EERA JPNM pilot project TASTE.
The European Atlas of Natural Radiation is a collection of maps displaying the levels of radioactivity caused by different natural sources in Europe. The Atlas is intended to familiarise the public with the radioactive environment, to give a more balanced view of the annual dose ...
Small punch creep data created for P91 by the JRC in the scope of its work in support of the development and qualification of the small punch creep test procedure and associated assessment methods.
The European Energy Research Alliance, set-up under the European Strategic Energy Technology Plan, has launched an initiative for a Joint Programme on Nuclear Materials (JPNM). The JPNM aims at establishing key priorities in the area of advanced nuclear materials, identifying fun...
Small punch and small punch test creep data obtained in a round robin exercise for the elaboration of an EN standard on small punch testing.
DOI catalogue for the results of tests conducted by the European Commission JRC, under the frame of the Inter Laboratory Study (ILS) on Thermo-mechanical Fatigue (TMF). The primary purpose of this study was to provide a precision and bias statement to be included in the revision ...
In the framework of its institutional project on Gen IV nuclear reactors, the JRC-IET performs pre-normative materials qualification research within the work package PreMaQ. The activities focus on evaluation methods like ultrasonic fatigue, neutron diffraction, thermoelectric po...
The core business of the TIPINS information system is a database containing information about Nuclear Safety Contracts financed by the European Union and implemented by DEVCO and ELARG. The information about the contracts is accessible to all anonymous visitors. Speciffic informa...
The core business of the CH-OEF information system is a database containing information about operating experience in nuclear power plants. This data records are complemented with the most relevant technical aspects of the related nuclear power plants and operating experience. Ac...
The Network for Evaluating Structural Components (NESC) coordinated extensive materials testing and fracture analyses performed by a group of twenty European organizations. The NESC-IV project addressed the transferability of fracture toughness data from laboratory specimens to a...
The data in this catalog were created during two consecutive PhDs investigating the viability of the small punch test to determine the creep, tensile, and fracture properties of P91 steel. The work was undertaken in support of the development and validation of the Code of Practic...
The documents in STRESA are accessed in hierarchical mode. The general structure for experimental facilities is: 1) Facilities; 2) Tests or Experiments; 3) Documents and/or Data. For each of these experiments an arbitrary number of documents/data have been stored. The documents/d...
The data sets of this catalog is data from uniaxial tensile tests on tapered specimens made of duplex steel AISL 316L in PWR conditions at 340 C. The tests were performed within the in-kind project MICRIN (MItigation of CRack Initiation), which ran under the umbrella of NUGENIA T...
The data sets of this catalog is data from Micro-compression tests of 316L pillars, room temperature, JRC results from the EU - SOTERIA project.
Collection of nanoindentation (single cycle) test data for Gr. 91 material at 23 degrees Celsius and maximum indenter force of 1 mN created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.
Collection of nanoindentation (single cycle) test data for Gr. 91 material at 23 degrees Celsius and maximum indenter force of 5 mN created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.
Collection of nanoindentation (single cycle) test data for Gr. 91 material at 23 degrees Celsius and maximum indenter force of 10 mN created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.
Collection of nanoindentation (single cycle) test data for Gr. 91 material at 23 degrees Celsius and maximum indenter force of 50 mN created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.
Collection of nanoindentation (single cycle) test data for Gr. 91 material at 23 degrees Celsius and maximum indenter force of 100 mN created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.
A collection of indoor 3D datasets aimed at testing indoor localization algorithms
The data in this catalog were created in the scope of a programme designed to evaluate the reliability of the Small Punch (SP) testing method as an alternative mechanical test technique for evaluation of the residual life and integrity assessment of components in ageing plants. T...
The data in this catalog were created in the context of fusion research on the ductility of irradiated 316 welds. Electron beam and shielded metal arc weld joints in solution annealed 316 L plate were sampled along their heat affected zone and molten zone. The samples were irradi...
The elaboration of risk maps, as tools to identify and categorise the affected areas in terms of radiological impact to population, are very useful in Emergency Preparedness and Response Plans, as they allow to prioritise where the application of remediation techniques is necessa...
Data concerning the experimental campaign performed in the framework of the development of a laser based radiocarbon analytical technique for the characterisation of radioactive waste.
The Nuclear Trade Atlas is developed to promote understanding of global trade flows of nuclear goods. Trade flows are classified under a basket of Harmonized System (HS) codes associated with nuclear commodities. While these HS codes are understood to also encompass non-nuclear i...